Ultimate Jigging 45mm Reel Knob is precisely made; no play (only 0.01mm). When you install it, you must make sure every part is align and clean,
then follow the diagram paper and instruction that come with the Knob to install it.
This Ultimate Jigging 45mm Knob Accurate Model Package is with a "B" Type Shaft (B Shaft). It is well crafted from solid
6061-T6 Aluminum stock with type two anodized and two-tone color. It is very stylish and light weight.
It can be assembled on most of Accurate reels and old version of Avet reels as below：
Accurate Boss series including all BX and Xtreme two speed reels.
Old Version Avet SX, MX, JX, LX, HX and Pro EX single and two speed reels (a 6 mm Sleeve will be included in B Kit for Avet
reel). OLD VERSION AVET REEL KNOBS ARE NOT REMOVABLE (IT WAS RIVETED ON ARM).
Fit on any reel has 5mm hole on handle arm after remove original knob.
Most of Accurate Reel Knobs and some old Avet Knobs are not removable; you need to drill it off from the original knob.
The processes are as below:
Remove whole handle from your reel first, place on flat and steady object;
Use center punch make a mark at center of rivet before you drill down. Or, you can use smaller size drill bit to drill the center first, then use bigger drill,
not need to drill deep, to go deep enough to drill out the rivet flat part.
If the rivet hole on handle arm is smaller than 3/16” or 5mm, you can use 3/16” or 5mm drill bit to make the hole to fit new knob screw.
For New Avet Reel Knobs, please see 45mm Knob Avet Model Package.
Please see "45mm Knob Accurate Model Upgrade
Steps" for the detail installation. If you have any question, please email us at firstname.lastname@example.org to
Brand: Ultimate Jigging
Length：62mm. Dia: 45mm. Weight: 46g/1.6oz.
(For your prefer, you can choose "Silver" cup for this 45mm Reel
Buy 1 piece for $83.00/each