Ultimate Jigging 45mm Knob Type II is well crafted from solid 6061-T6 Aluminum stock with type two anodized and two-tone colors. This Knob is a true art piece; it
takes a lot of machine work, unlike other copies only have holes and lines on it. Indentation design on cup (bottom) increases power of grip. It is very
stylish and light in weight only 43g/1.5oz. This fine Handle Knob is designed in USA and made in Taiwan.
This 45mm Knob Type II 2 Bearings Model Package can be assembled for the reels list as below:
Daiwa spinning Saltiga/Saltist 4000~7000, Saltiga/Saltist 20~50, Catalina spinning 4500-6500, Catalina 20-30 or any Daiwa Japan Catalog with Label “L” as Seaborg, Tanacom..and many more. (D Kit, see
Installation Tip 2)
2008 or newer 2013 model Shimano SW New Stella 4000~20000. (NS Kit, see installation Tips
2008 and newer model Shimano SW Twinpower 4000~12000. (NS
Kit, see installation Tips 5)
Shimano Stella Saragosa 18000 ~ 25000 SW Reel.(NS Kit, see installation Tips 4)
Shimano new or old Talica single and two speed reels from 8-25. (NS Kit, see installation Tips 3)
Each 45mm Knob Type II 2 Bearings Model Package includes: one Ultimate Jigging 45mm Reel Knob Type II, an Instruction Paper, an Associated Kit (NS/S or D) and Two Associated Bearings (By choosing "D Kit", 2 8mm Bearings will be included in the Package, or choosing "NS/S Kit", one 9mm
Bearing & one 8mm Bearing will be included in the Package).
If you have any Accurate or Avet conventional reel with 5mm or 6mm round hole on the arm, please see "45mm Knob Type II - Accurate & Avet Model".
Kits (D, NS/S) vs Bearings:
- D Kit associates with two 8x5x2.5 Bearings. (for Daiwa reels)
- NS/S Kits associate with one 8x5x2.5 Bearing and one 9x4x4 Bearing.
(for Shimano reels)
- Please use the included Kits (D or NS/S) and 2 associated Bearings to follow the diagram instruction to install the 45mm Knob Type II.
For Daiwa Saltiga, Saltist, Seabort and Tanacom Reels, please use the D kit
associated with two 8x5x2.5 Bearings and follow the diagram instruction.
New Talica Reel has no Bearing inside of handle knob, it only comes with one black and one white
plastic sleeves; both O.D. is 9mm. To install Ultimate Jigging 45mm Knob Type II needs two Japanese Bearings (one 8*5*2.5 Bearing and one 9*4*4 Bearing included in this
Package) with NS Kit.
For Shimano Stella Saragosa 18000 ~ 25000 SW reels, please use NS kit and one 8*5*2.5 Bearing & one 9*4*4 Bearing (included in the Package) to replace plastic sleeves from original knob and follow the
New 2008 and newer model Stella, Twipower and other high-end Shimano Spinning reels, the Cup Bearing Size is 9mm but this 45mm Knob Type II comes with
8 mm Bearing Housing; that is why a 8mm Bearing will be needed. (Most newer Shimano reels, using NS Kit, shall be with one 9*4*4
Bearing and one 8*5*2.5 Bearing which included in the Package to install.)
Brand: Ultimate Jigging
Size O.D.: 45mm.
Total Length: 52mm.
Each 45mm Knob Type II 2 Bearings Model includes: one Ultimate Jigging 45mm Knob Type II, the Instruction Paper, Associated
Kits (NS/S or D) and 2 Associated
(For your prefer, you can choose "Silver" cup for this 45mm Type II Knob.)
- Buy 1 piece for $74.00/each