The Ultimate Jigging Custom Power Arm (Model PA001) - with either a custom knob or T-Bar - fits selected Daiwa and Shimano spinning reels. To confirm compatibility, measure your reel’s main drive shaft (the threaded portion the handle screws onto).

🔴 How to Measure (Quick Guide)

⓵ Remove the handle from your reel.

⓶ Using calipers, measure the outer diameter (OD) of the threaded shaft in millimeters.

⓷ If your reel supports left and right cranks, check which side you use and measure that side’s threaded shaft.

⓸ Note the measurement and match it to the fit chart below.

💧Tip: Measure the threaded section itself (not the knob shaft). If in doubt, send us a photo and your measurements—we’ll confirm fit before you order.

🔵 Daiwa Compatibility

◉ Model PA001-DX

◎ Fits Daiwa reels with 7 mm (left-crank) / 6 mm (right-crank) threaded main drive shaft.

◉ Model PA001-D

◎ Fits Daiwa reels with 8 mm (left-crank) / 7 mm (right-crank) threaded main drive shaft.
◎ Includes (examples): New Saltiga 6000 - 6500, Saltiga Z 5000 - 6500, Catalina 5000 - 6500, Dogfight 6500 - 7000.

◉ Ultimate Jigging Related Products (for Daiwa)

◎ UJ Power Arm PA001-D w/ 45 mm Knob
◎ UJ Power Arm PA001-D w/ 45 mm Type II Knob
◎ UJ Power Arm PA001-DX w/ 45 mm Knob

🔵 Shimano Compatibility

◉ Model PA001-S

◎ Fits any Shimano reel with a 7 mm main drive shaft (works for either left- or right-hand crank).
◎ Confirmed fits include:

● Shimano Stella SW (2008 - 2013) 10000 - 30000 (Left or Right crank)
● New TwinPower SW 10000 - 14000 (Left or Right crank)
● Saragosa 18000F, 20000 - 25000SW - Left crank only (right side on Saragosa is 6 mm)

◉ Ultimate Jigging Products (for Shimano)

◎ UJ Power Arm PA001-S w/ 45 mm Knob
◎ UJ Power Arm PA001-S w/ 45 mm Type II Knob

🌔︎ Features of the Ultimate Jigging Power Arm

◉ Longer leverage, less effort - Extended arm length CNC-machined from 6061 aluminum for smoother cranking and more power on big fish.

◉ Lightweight, strong core - Arm’s main shaft machined from solid titanium; lighter and stronger than typical stainless (approx. 13 g vs 17 g for comparable stainless parts).

◉ Saltwater ready - Two-tone anodized finish for maximum corrosion resistance.

◉ Knob compatibility - Handle-knob shaft machined from solid 304 stainless; fits all Ultimate Jigging knobs:

◎ 40 mm knob with NS cap

◎ 45 mm knob with NS kit

◎ T-BAR with NS shaft housing

🌔︎ Before You Order

◉ Double-check your measured shaft OD and crank side (left vs right).

◉ If your measurement doesn’t exactly match the sizes above - or if your reel model is not listed - send us your reel model, shaft measurement, and a quick photo. We’ll verify fitment for you.